Poulan designed their chainsaws to function best with specific oil. Though other oils of the identical variety may be used, following perfect fueling specifications can help make certain that your chainsaw works at its optimal. Beyond specific petroleum type and brand, a specific ratio of oil and gas is necessary when fueling the motor.
Poulan encourages customers to use its own brand of 2-cycle oil for engines that are lookup, most commonly seen in 3.2 oz size. Poulan brand oil has been created particularly for its own chainsaws and thus it is the only oil that the brand guarantees. In case Poulan brand oil isn’t available, opt for a high quality oil that is tagged for air-cooled 2-cycle engines. Be sure to look closely at labels for the suitable type — do not use oil intended for other machines or water-cooled engines.
Rather than having two separate tanks for gas and petroleum, Poulan chainsaws have a single tank that requires a gas-oil blend. Chainsaws by Poulan work best working on a gas-oil ratio of 40 parts gas to 1 part oil. Mix with caution — a chainsaw is fueled with too much gas in the mixture, it may overheat or malfunction. Similarly, a chainsaw with too much oil in the fuel mixture can act slow.
Not only are Poulan machines built to operate with a specific ratio, but also with specific gas. For optimum performance, Poulan specifies regular unleaded gas with 87 octane. If necessary, you may use gas that’s been blended with up to 10 percent alcohol additives. Unless your Poulan merchandise manual instructs otherwise, do not use gas in a Poulan chainsaw.
Left alone, the oil and gas will naturally separate from one another. To prevent potential harm to the chainsawgrab a fresh gas container and mix the oil and gas into it until refueling. Be sure to mix well. Poulan quotes a typical 30 days ahead of the oil and gas fully separate again. To prevent damaging the motor, do not mix more than a month’s supply of fuel at one time.
The Ol’ Bar and Chain
Poulan chainsaws can also be equipped with pub oil reservoirs. Should you have to fill the pub oil, use just Bar & Chain oil, maybe not the 2-cycle oil employed in the motor.